|
|
 |
|
|
METAL GRID, MOISTURE CONTROL SYSTEM (MCS)
The Brick-It™ Moisture Control System (MCS) is the only system in the world that was especially designed to answerall moisture concerns and for which was awarded a US & Canada Patent.
Brick-It™ MCS is the best way to install exterior thin brick because the metal grid was designed to
- Allow Simple, Fast And Efficient Installation
- Create Perfectly Aligned Brick Veneer Every Time and, The Interlocking Feature And Structural Panel Shape Provides Equal Weight Distribution Of The Bricks, Reinforces The Building Corners And Gives Additional Support To The Wall Itself.
- Keeps Free Air Flow Between The Veneer And The Wall.
- Offset weep holes drain 100% of water every 8 inches.
- High Impact Mat Provides Rapid Exit For Water Which Is Naturally Absorbed By Brick
- Compartmentalized Channels Promote Pressure Equalization
With the help of our instructional video, even homeowners can do it themselves. In addition, it saves time and money.
See Why Brick-It™ is right for you.
Note: Purchase a complete system and download the
"Brick-It™ Yourself" video FREE. The package includes: panels, thin bricks, adhesive, mortar, mortaring bag and tip and joint tool. Ask your Brick-It™ representative for further details. |
|
|
|
TEST REPORTS:
TAS 201, 202, 203 
E84 Flame & Smoke Test
Pullout Test
|
|
| |
|
|
New! United States Patent #8,141,310
Florida Product Approval #FL14427 |
|
The Thin Brick
Only real brick gives you the beauty and warmth of brick and the Brick-It™ Designer Metal Grid Systems incorporates
quality severe-weather tested, kiln-fired, authentic, clay thin brick. Bring the outside in and give your house or building the
earthy touch of brick. Transform plain walls into something warmer, cozier with a timeless finish.
The Brick-It™ Moisture Control System (DMG)
The panel is a Mill Certified, G-90 Galvanized (non-corrosive) Metal formed to a patented Structural shape to align brick
courses and to support and ensure a mechanical bond of each brick in place. It was created to make the installation of
thin brick easy and durable. The shelves are for supporting the bricks and create perfect mortar lines. The interlocking
edges found every 8 ¼” at the top and bottom of each panel become triple metal shelves that provide additional support
to each grid and reinforce the wall as well. The interlocking edges produce level and straight horizontal lines creating
perfectly aligned bricks every time. Mortar anchoring slots ensure a bonding to the grid, and the linear array of holes is
designed for adhesive providing a mechanical attachment between the brick, grid and substrate. Roll formed continues
ledges make this panel extremely rigid. In addition the need for starter channels, special corner panels and other is
entirely eliminated. The Brick-It™ Patented Panel system is the simplest, most user friendly and the strongest thin brick
installation system available.
Weep Holes are strategically placed on all ledges to collect and weep out water (naturally absorbed by brick) to the back
of the panel. High impact drainage mat which is installed in the back of the panel promotes rapid drainage, allows equal
air pressure (at front and back of the veneer) and Free Air Flow contributes to the wall ventilation.
|
Brick-It™ Systems Material's Calculator
(only for the 48"(w) x 8 1/4"(h) Designer Metal Grid Panel) |
Brick Depth |
SQ. FOOTAGE NEEDED |
|
Brick-It™ PATENTED PANELS REQUIRED |
ADHESIVE REQUIRED |
BRICKS REQUIRED |
# OF BRICK CORNERS REQUIRED |
CEMENT REQUIRED |
TOTAL WEIGHT* |
|
| * Total weight calculation is approximate and actual weight will be determined by Brick-It™ Shipping Department.
Every shipment is based on a 2000 lb. skid weight capacity. The shipment charges vary and will be quoted on a project by project basis. |
| * Total item calculation is approximate and does not include waste factor.
Please speak to a Brick-It™ representative to determine waste factor amount
to include in your order. |
|
|
|
&imgName=MS_Double Panel with Drainage Icon with bricks_large.png','window1'))
&imgName=StaggeredPanelCornerDetail_large.jpg','window1'))
&imgName=MS_PanelSystem_large.png','window1'))
&imgName=MS_DoublePanelDrainage_large.png','window1'))
&imgName=PanelSystem_large.png','window1')){kind=link}