|
|
 |
 |
 |
DESIGNER METAL GRID SYSTEM
The Brick-It™ Designer Metal Grid System (DMG) is the original patented,
Brick-It™ panel system and is our most popular. It's the best way to
install thin brick because the patented metal grid was designed to:
- Allow Simple, Fast And Efficient Installation
- Create Perfectly Aligned Brick Veneer Every Time
- And, The Interlocking Feature Provides Equal Weight Distribution Of
The Bricks And Gives Additional Support To The Wall
With the help of our instructional video, even homeowners can do it themselves. In addition, it saves time and money.
See Why Brick-It™ is right for you.
Note: Purchase a complete system and download the
"Brick-It™ Yourself"
video FREE. The package includes: panels, thin bricks, adhesive,
mortar, mortaring bag and tip and joint tool. Ask your Brick-It™
representative for further details.
|
|
(click to enlarge)
DESIGNER METAL GRID SYSTEM
Download the FREE
"Brick-It™ Yourself" Video Installation Instructions PDF
See us on
|
 |
Brick-It™ Designer Metal Grid Panel
AVAILABLE IN TWO SIZES:
48"(w) x 8 1/4"(h)
96"(w) x 8 1/4"(h)
|
|
Brick-It™ Designer Metal Grid Panel
Special Order Panel
AVAILABLE IN TWO SIZES:
48"(w) x 41 1/4"(h) 96"(w) x 41 1/4"(h) |
|
|
|
The Thin Brick
Only real brick gives you the beauty and warmth of brick and the Brick-It™ Designer Metal Grid System
incorporates quality 1/2" severe-weather tested, kiln-fired, authentic, clay thin brick.
Bring the outside in and give your house or building the earthy touch of brick.
Transform plain walls into something warmer, cozier with a timeless finish.
The Brick-It™ Patented Panel
The panel is a non-corrosive metal formed to a patented shape to align brick
courses and to support and ensure a mechanical bond of each brick in place. It was
created to make the installation of thin brick easy and durable. The shelves are
for supporting the bricks and create perfect mortar lines. The interlocking edges
found every 8 1/4" at the top and bottom of each panel become triple metal shelves
that provide additional support to each grid and reinforce the wall as well.
The interlocking edges produce level and straight horizontal lines creating perfectly aligned
bricks every time. Mortar anchoring slots ensure a bonding to the grid, and the linear array of holes is
designed for adhesive providing a mechanical attachment between the brick, grid
and substrate.
|
Brick-It™ Systems Material's Calculator
(only for the 48"(w) x 8 1/4"(h) Designer Metal Grid Panel) |
SQ. FOOTAGE NEEDED
|
|
Brick-It™ PATENTED PANELS REQUIRED |
ADHESIVE REQUIRED |
BRICKS REQUIRED |
# OF BRICK CORNERS REQUIRED |
CEMENT REQUIRED |
TOTAL WEIGHT* |
|
| *Total weight calculation is approximate and actual weight will be determined by Brick-It™ Shipping Department.
Every shipment is based on a 2000 lb. skid weight capacity. The shipment charges vary and will be quoted on a project by project basis. |
| * Total item calculation is approximate and does not include waste factor.
Please speak to a Brick-It™ representative to determine waste factor amount
to include in your order. |
|
|
 |